E-500 Superiority
Leading Technology
Is one of China’s most high-end fire pharmaceutical products, its technical performance is in the international advanced level.
Efficient Extinguishing
Fast temperature reduction. In the E-500 extinguishing experiment, E-500 fire-extinguishing agent adopts photochemistry cooling effect and can reduce the temperature of the fire field from over 1000℃ to touchable temperature within 10 seconds, effectively protect the personal safety.
Rapid penetration. Make the water surface tension from 72 dyne / cm down to 17 dyne / cm can quickly penetrate into the internal combustion, rapid fire and prevent re-ignition. Large capacity of the generated foam, the foam is fine, stable, not easily broken, and has good mobility; can quickly cover the surface of the combustion, combustion is inhibited and prevent resurgence effectively.
The foam extinguishing agent has low spillage, can effectively curb the liquid spills of the combustion while extinguishing, to prevent the spread of fire.
Reduce the water consumption during the fire.
The excellent efficiency helps:
Quickly extinguish the fire and prevent the fire getting worse.
Protect the safety of personnel, good for observing and breathing.
Reduce property damage
Reduce fire support, water stains and other damage. Facilitate for the firefighters to rescue and the people to escape.
Environmental Friendly
It is the only fire agent product that obtained the “China Environmental Label” of the State Environmental Protection Industry.
ODP (Ozone depletion potential) is 0.0, does not destroy the ozone layer.
GWP (Global warming potential) is 0.0, does not affect the human environment.
The life of the resultant lifetime in the atmosphere and environment (ALT) is short after extinguishing, can be completely self-degradation within 30 hours.
Excellent environmental resistance helps to:
Maintain the sustainable development of ecological environment and living conditions for the benefit of all mankind.
Facilitate the process of building a harmonious society and harmonious city.
To establish a responsible image for a country, city and enterprise. Promote the implementation of the national environmental policy and sustainable development strategies.
Non-Toxic
Does not produce any toxic or harmful substances during production and usage.
During hands, face and other skin contact test, the skin does not feel any discomfort.
The mouthwash experiment shows that E-500 does not have any damage on the human mucosal tissue.
The corrosion resistance is very low, does not damage the storage tank, firefighting facilities and the protected goods.
Rapid elimination of smoke and harmful gases, conducive to observation and breathing, facilitate for the firefighters to rescue and the people to escape.
The residue is very easy to clean after the fire, can be self-degradation, especially good for the protection of the Petroleum, chemical products.
Excellent clean ability helps:
Avoid common extinguishing agent toxicity potential threat to human health.
Greatly reduce the cost of cleaning up after firefighting.
Greatly reduce fire facilities maintenance costs.
Greatly reduce the extinguishing agent’s devastating on the protected items.
Widely-used
Efficiently extinguish six fire types A, B (polar and non-polar); C, D (not strong reaction with water);E&F.
Applies to all foam extinguishing facilities and water extinguishing facilities, without retrofitting existing equipment.
Ideal for petroleum, chemical, airports, docks ship, rocket launch sites, tunnels and other places.
Filling extinguisher is ideal for mining, trains, cars, crowded places, hotels, residential and other human settlements living spaces.
Excellent versatility helps:
Savings in equipment replacement costs.
Easy to use, the fire department can quick to extinguish all types of fires directly.
E-500 Specifications
- Shelf lifeis based onGB15308 – 2006 regulations, when there is a newnational standard, the actual useful life shall prevail offactory
- If the data in this table does not match with the type approval test reports, inspection reports to the type approved.
The cost comparison analysis of E-500 with other extinguishing agent:
* When E-500 is in use, the dosage of eliminate equally oil-fired area, is less than the similar domestic extinguishing agent. Extinguishing efficiency, only need lower expenses extinguishing costs; reduce the losses caused by fire while reduce extinguishing time.
* E-500 products has less demanding on storage, easy to store, the requirement of the equipment’s use and maintenance is simple, the corrosive of the device is lower than water, no extra maintenance costs, reduce the cost of storage and use.
* E-500 products can be used widely; can eliminate six types of fires A, B, C, D,E and F; while the same type of domestic extinguishing agent can only extinguish two types of fires A, B.
E-500 Technology Innovation A
Principles of the E-500 fire extinguishing agent
*Foam covering
E-500 fire extinguishing agent has every effect of ordinary foam extinguishing agent, it can generate large amounts of foam, foam density, stable, not easily broken, good mobility quickly; it also will rapidly cover the surface of the combustion, reducing the oxygen concentration.
* AFFF isolation
Capable of form a water film, block the inflamer’s molecules to volatilize to the air, and avoid the fuel material of the combustion to contact with the oxygen.
*Chemical neutralization
After the E-500 contacted with the burning liquid, can be neutralized with the combustible to make it becomes inert material which can be avoided of the volatile of the flammable gases, thereby reducing the risk of burning and explosion.
* Photochemistry inhibition
Partial composition of E-500 reacted with generated free radicals of the flame, forming a stable material, un-combusted.
* Photochemical effects of cold fire
Photochemical effects of cold fire can quickly and significantly reduce the fire scene’s inside temperature, reducing generated speed of free radicals’ even to zero, low surface tension makes the E-500 rapidly penetrate into the interior of combustion, so that the photochemical effects of the cold fire in-depth proceed.
E-500 fire extinguishing agent, Distinctive
No.1. E-500 extinguishing agent creatively used of photochemical effects of the cold fire.
*The proportional to the wavelength of light is inversely, i.e., the shorter the wavelength the greater the energy, the greater the wavelength the smaller the light energy.
* From the chemical point of view, when the substances are burning, the energy is converted through the luminous energy to the thermal energy by radiating. When substances are in the combustion process, they will continuously release high-energy photons, these photons have shorter wavelength, located between 200nm-300nm, contains a very high energy.
*E-500 fire extinguishing agent contains a kind of substance that having a functional group of the excitation light, the substance has strong absorption of photons that with high energy in a wavelength between 200nm-300nm. After absorption of a photon, the electron of functional groups occurrence of leaps, and become excited. The high-energy that electrons absorbed then radiated to a longer wavelength, high-energy thus converted into low-energy, while the electronic ground has back to the state.
E-500 Technology Innovation B
*Electrons that energy has been released will not affect the combustion chain reaction, and will be proceed to the next cycle “photon absorption – leap – release of energy- back to the ground state “immediately. Since each cycle is completed in an instant, the cooling process is extremely fast.
*From a macro perspective, reflected these substances of functional groups with light excitation has greatly increases the melting of water, generously improved the ability of heat absorbing of water capacity, the effect of rapid out fire and cooling is very obvious.
No.2. Magnetization and sequestration technologies
*High magnetic strengthen and sequestration technologies applied in the production process, spawned a wealth of optical excitation functional group substances.
*The particles of the product reach the nanoscale, very fine uniformed, can increase the number of foam, the mobility and fire-resistant properties, and permeability of the extinguishing agent, enabling the extinguishing agent penetrated into the internal of the combustion quickly, to prevent recrudescence effectively.
* Nanoscale products’ particle with high specific surface area can be contacted with combustion molecules, free radicals and others more sufficiently, absorb more photons, then fully volatilized the performance of the product.
Extinguishing agent Series
Foam fire extinguishing agent series model Agent and water rate
Water extinguishing agent series
EASTEX E-500 Environment-Friendly A-Type Foamite
Product Specification
- Type
E-500 1% (AFFF, -18℃)
■ Characteristics
- Green and environment-friendly. Granted the “Certification of China Environmental Labeling”, this product is pollution-free to air, soil and water resources, and non-toxic, innocuous to human body.
- Good compatibility. This product is applicable to firefighting truck with compressed air foam (or called A-type fire-extinguishing foam tanker), meanwhile applicable to low-expansion foam generation system firefighting truck (e.g., common fire-extinguishing foam tanker and high-pressure jet fire-extinguishing foam tanker), etc.
- Fast-cooling and water-saving, this product can boost fire-extinguishing efficiency and safeguard personal life with effectiveness.
- Eliminating heavy smoke fast, this product can effectively reduce harms of toxic and noxious gases to human body.
- Application Scope
This product is mainly applied in putting out (A-type) fires with solid materials and thermal insulation protection for buildings, or in putting out (B-type) fires with non-water-soluble liquids (e.g., gasoline, diesel oil, etc.); typical application scope includes urban buildings, industrial factory zones, tunnels, automobiles, warehouses and sites with fuel leakage.
- Use Method & Notices
- Mixing ratio: Foam liquid shall be mixed with water into a foam solution when used. The volume percentage of the foam liquid in the foam solution is called mixing ratio. In putting out (A-type) fires with solid materials, it is suggested that the mixing ratio of mixture be adjusted to 0.3% or so; in putting out (B-type) fires with non-water-soluble liquids, it is suggested that the mixing ratio of mixture be adjusted to 1% or so; in thermal insulation protection, it is suggested that the mixing ratio of mixture be adjusted to 0.5% – 1%. Optimal mixing ratio may vary, depending on the vehicle type. Users are advised to undertake mixing ratio test and corresponding foam performance test based on the specific condition of the compressed air foam system equipment for the vehicle, so that the fire extinguisher can achieve the optimal performance in that compressed air foam system.
- In order to avoid being diluted by water, if the EASTEX E-500 foam solution is used during the fire-extinguishing process, please do not spray water over the area in the presence of extinguishing fluid at the same time, so as to ensure the fire-extinguishing performance of E-500 extinguishing fluid.
- EASTEX E-500 fire extinguisher cannot be mixed with other foam liquids since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when putting out fire.
■ Storage Condition
- EASTEX E-500 A-type foamite can be ideally stored in the vessel with original package or a tank or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm)
- Avoid sun exposure, store sealed. Foam liquids would evaporate, particularly when exposed in the air where the evaporation could accelerate. Therefore the foamite should be stored sealed in order to prevent the liquid from evaporating. If stored in a fluid reservoir, it should be sealed and covered with a ventilation valve in order to prevent the air from flowing freely inside the reservoir.
- Environmental temperature for storage is suggested to keep within the range of 5 ℃- 45 ℃.
- Inversion is strictly prohibited. Stacking cannot exceed three layers.
■ Storage Term
Under appropriate storing and keeping condition, the maximum storage term for this product is above 8 years. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Security and Environmental Protection
- EASTEX E-500 A-type foamite is progressively biodegradable. However, measures should be taken to prevent its condensed liquid, like any other substance, from being emitted directly into underground water, ground water or rainwater pipes.
- Foams that are diluted or produced in vast quantities can be emitted in accordance with the local sewage treatment provisions.
- Foam liquids are non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by wearing protective goggles and preventing contact with foam liquid. In case that the eyes contact the foam liquid accidentally, users should wash their eyes with water immediately.s
■ Package
Stored in 25 L square barrel – Gross weight 26.3 kg, net weight 25 kg, volume 0.032 cubic meters
EASTEX Environment-Friendly Anti-Solvent Foamite
Product Specification
- Type
E-500 3% (AFFF/AR -5℃)
■ Brief Introduction
EASTEX E-500 3% (AFFF/AR.-5℃) anti-solvent fire-extinguishing agent is an environment-friendly water-based foamite independently developed by Xiamen EASTEX FireTec. It puts out fires with hydrocarbons and polar solvents (e.g., alcohol, methyl alcohol) as well as fires with the mixture of both or with ethanol gasoline by being mixed with water at a compounding concentration of 3%. That’s the reason for its general usability.
It is an anti-solvent AFFF foam liquid containing a particular bio-polymer. Such bio-polymer has two functions: First, it can form a protective film between the water-soluble fuel and foam so that it can extinguish fire; second, the quality of its foams is superior to common AFFF foams in terms of better stability and heat resistance and stronger anti-burning and sealing properties.
Our company has passed ISO9001 quality system certification and ISO14001 environment certification.
■ Characteristics
- Technologically advanced. This product is at global leading level in terms of technological performance.
- Green and environment-friendly. This is the only product that has received the “China Environmental Labeling” from National Environmental Protection Agency in the current pharmaceutical industry. It is non-pollutive to atmosphere and soil, non-toxic and innocuous to human body.
- Fast-cooling and fast-extinguishing, this product can safeguard personal life with effectiveness.
- Eliminating heavy smoke fast, this product can effectively reduce harms of toxic and noxious gases to human body.
- Water-saving, this product can boost fire-extinguishing efficiency.
- With extremely low corrosivity, this product can significantly reduce the maintenance costs of firefighting facilities.
■ Fire-Extinguishing Capacity
With unique fire-extinguishing capacity, this product has passed the type inspection performed by China National Center for Quality Supervision and Test of Fixed Fire-fighting Systems and Fire-resisting Building Components. Its fire-extinguishing capacity is at IA level. Its fire-extinguishing means consists of four steps:
- Photochemical reaction – cooling effect
- Coverage with foams
- Sealing and insulating effect of AFFF
- Formation of aggregation layer under syntrophy
- Application Scope
Typical application scope includes storage tank areas for petroleum chemical engineering, filling stations, docks, processing zones, warehouses and sites with fuel leakage, etc. It can also be used as a wetting agent to put out A-type fires.
This product cannot be stored in mixture with other fire-extinguishing agents since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when putting out fire.
■ Storage Conditions
EASTEX environment-friendly E-500 3%AFFF/AR fire-extinguishing agent can be ideally stored in the vessel with original package or a reservoir or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm).
Foam liquids would evaporate, particularly when exposed in the air where evaporation could accelerate. The fluid reservoir should be sealed and covered with a ventilation valve in order to prevent the internal air from flowing freely. The environmental temperature for storage is suggested to keep within the range of 5 ℃- 45 ℃.
■ Storage Term
The valid term stipulated by the state is 2 years. Under appropriate storing and keeping condition, the valid term of this product can exceed the requirement of national standard. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Environmental Protection
EASTEX environment-friendly E-500 3%AFFF/AR foam liquid is progressively biodegradable. However, measures should be taken to prevent its condensed liquid, like any other substance, from being emitted directly into underground water, ground water or rainwater pipes. Foams that are diluted or produced in vast quantities can be discharged in accordance with the local biological sewage treatment system provisions.
This foam liquid is non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by preventing contact with the foam liquid. In case that the foam liquid drops into eyes accidentally, users should wash their eyes with water immediately.
■ Package
There are 25 L or 200 L packages for this product.
Stored in 25 L square barrel – Gross weight 26 kg, volume 0.032 cubic meters
Stored in 200 L bucket – Gross weight 207 kg, volume 0.326 cubic meters
EASTEX Environment-Friendly Foamite
Product Specification
- Type
E-500 3%AFFF (seawater type)
■ Brief Introduction
EASTEX E-500 3%AFFF (seawater type) is an environment-friendly foamite developed by Xiamen EASTEX FireTec. It is a world-leading fire-extinguishing agent that employs proprietary and independent technologies and is a member of EASTEX E-500 family of fire-extinguishing agents. Our company has passed ISO9001 quality system certification and ISO14001 environment certification.
■ Characteristics
- Technologically advanced. This is a product that has won national invention patent and features the world leading level in terms of technological performance.
- Green and environment-friendly. This is the only product that has received the “China Environmental Labeling” from National Environmental Protection Agency in the current pharmaceutical industry. It is non-pollutive to atmosphere and soil, non-toxic and innocuous to human body.
- Fast-cooling and fast-extinguishing, this product can safeguard personal life with effectiveness.
- Eliminating heavy smoke fast, this product can effectively reduce harms of toxic and noxious gases to human body.
- Water-saving, this product can boost fire-extinguishing efficiency.
- With extremely low corrosivity, this product can significantly reduce the maintenance costs of firefighting facilities.
■ Fire-Extinguishing Principle
With unique fire-extinguishing capacity, this product has passed the type inspection performed by China National Center for Quality Supervision and Test of Fixed Fire-fighting Systems and Fire-resisting Building Components. Its fire-extinguishing principle is:
- Photochemical reaction – cooling effect
- Chemical neutralization with combustibles to produce inert matters.
- Coverage with foams
- Sealing and insulating effect of AFFF
- Formation of aggregation layer under syntrophy
- Use Method
- Use after being mixed with water – seawater or freshwater – via a foam fire-extinguishing facility. Agent-to-water ratio is 3:97.
- In order to avoid being diluted by water, if EASTEX E-500 foam fire-extinguishing fluid is used during the fire-extinguishing process, please do not spray water over the area in the presence of the extinguishing fluid at the same time, so as to ensure the fire-extinguishing performance of E-500 extinguishing fluid.
- EASTEX E-500 fire-extinguishing agent cannot be mixed with other foam liquids since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when putting out fire.
- EASTEX E-500 fire-extinguishing agent can be used on a firefighting truck not only by injecting the stock solution of the fire-extinguishing agent into the foam tank on the firefighting truck, but also by imbibing liquid from the bucket filled with the fire-extinguishing agent via the out-tank imbibing system on the foam firefighting truck.
- When putting out B-, C- and D-type fires, this product ought to be used in strict accordance with the standard proportioning. When putting out A-type fires, proportioning can be lowered appropriately according to the condition in the scene of fire after the fire is controlled (It is suggested that the proportion be lowered by half).
- This product has inferior effectiveness for polar B-type (water-soluble combustible liquids) fires. It is suggested that E-500 anti-solvent fire-extinguishing agent be used for putting out polar B-type fires.
■ Discharge Means
Two foam ejecting means – intense discharge or slow discharge – can be adopted to put out fires:
* Intense discharge: A firefighting means by which foams are directly ejected onto the surface of combustibles.
* Slow discharge: A firefighting means by which foams are indirectly discharged onto the surface of combustibles via a baffle, tank wall or any other surface.
■ Storage Conditions
EASTEX E-500 fire-extinguishing agent can be ideally stored in the vessel with original package or a reservoir or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm).
Foam liquids would evaporate, particularly when exposed in the air where evaporation could accelerate. The fluid reservoir should be sealed and covered with a ventilation valve in order to prevent the internal air from flowing freely. The environmental temperature for storage is suggested to keep within the range of 5 ℃- 45 ℃.
■ Storage Term
Under appropriate storing and keeping condition, the storage term for this product can reach above 8 years. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Environmental Protection
EASTEX E-500 fire-extinguishing agent is progressively biodegradable. However, measures should be taken to prevent its condensed liquid, like any other substance, from being emitted directly into underground water, ground water or rainwater pipes.
Foams that are diluted or produced in vast quantities can be discharged in accordance with the local biological sewage treatment provisions.
EASTEX E-500 foam liquid is non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by preventing contact with the foam liquid and wearing protective goggles. In case that the foam liquid drops into eyes accidentally, users should wash their eyes with water immediately.
■ Package
There are 25 L or 200 L packages for this product.
Stored in 25 L square barrel – Gross weight 26 kg, volume 0.032 cubic meters
Stored in 200 L bucket – Gross weight 207 kg, volume 0.326 cubic meters
EASTEX Environment-Friendly Anti-Solvent Foamite
Product Specification
- Type
E-500 6% (AFFF/AR -5℃)
■ Brief Introduction
EASTEX E-500 6% (AFFF/AR.-5℃) anti-solvent fire-extinguishing agent is an environment-friendly water-based foamite independently developed by Xiamen EASTEX FireTec. It puts out fires with hydrocarbons and polar solvents (e.g., alcohol, methyl alcohol) as well as fires with the mixture of both or with ethanol gasoline by being mixed with water at a compounding concentration of 6%. That’s the reason for its general usability.
It is an anti-solvent AFFF foam liquid containing a particular bio-polymer. Such bio-polymer has two functions: First, it can form a protective film between the water-soluble fuel and foam so that it can extinguish fire; second, the quality of its foams is superior to common AFFF foams in terms of better stability and heat resistance and stronger anti-burning and sealing properties.
Our company has passed ISO9001 quality system certification and ISO14001 environment certification.
■ Characteristics
- Technologically advanced. This product is at global leading level in terms of technological performance.
- Green and environment-friendly. This is the only product that has received the “China Environmental Labeling” from National Environmental Protection Agency in the current pharmaceutical industry. It is non-pollutive to atmosphere and soil, non-toxic and innocuous to human body.
- Fast-cooling and fast-extinguishing, this product can safeguard personal life with effectiveness.
- Eliminating heavy smoke fast, this product can effectively reduce harms of toxic and noxious gases to human body.
- Water-saving, this product can boost fire-extinguishing efficiency.
- With extremely low corrosivity, this product can significantly reduce the maintenance costs of firefighting facilities.
■ Fire-Extinguishing Capacity
With unique fire-extinguishing capacity, this product has passed the type inspection performed by China National Center for Quality Supervision and Test of Fixed Fire-fighting Systems and Fire-resisting Building Components. Its fire-extinguishing capacity is at IA level. Its fire-extinguishing means consists of four steps:
- Photochemical reaction – cooling effect
- Coverage with foams
- Sealing and insulating effect of AFFF
- Formation of aggregation layer under syntrophy
- Application Scope
Typical application scope includes storage tank areas for petroleum chemical engineering, filling stations, docks, processing zones, warehouses and sites with fuel leakage, etc. It can also be used as a wetting agent to put out A-type fires.
This product cannot be stored in mixture with other fire-extinguishing agents since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when putting out fire.
■ Storage Conditions
EASTEX environment-friendly E-500 6%AFFF/AR fire-extinguishing agent can be ideally stored in the vessel with original package or a reservoir or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm).
Foam liquids would evaporate, particularly when exposed in the air where evaporation could accelerate. The fluid reservoir should be sealed and covered with a ventilation valve in order to prevent the internal air from flowing freely. The environmental temperature for storage is suggested to keep within the range of 5 ℃- 45 ℃.
■ Storage Term
The valid term stipulated by the state is 2 years. Under appropriate storing and keeping condition, the valid term of this product can exceed the requirement of national standard. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Environmental Protection
EASTEX environment-friendly E-500 6%AFFF/AR foam liquid is progressively biodegradable. However, measures should be taken to prevent its condensed liquid, like any other substance, from being emitted directly into underground water, ground water or rainwater pipes. Foams that are diluted or produced in vast quantities can be discharged in accordance with the local biological sewage treatment system provisions.
This foam liquid is non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by preventing contact with the foam liquid. In case that the foam liquid drops into eyes accidentally, users should wash their eyes with water immediately.
■ Package
There are 25 L or 200 L packages for this product.
Stored in 25 L square barrel – Gross weight 26 kg, volume 0.032 cubic meters
Stored in 200 L bucket – Gross weight 207 kg, volume 0.326 cubic meters
EASTEX Environment-Friendly Foamite
Product Specification
- Type
E-500 6%AFFF (seawater type)
■ Brief Introduction
EASTEX E-500 3%AFFF (seawater type) is an environment-friendly foamite developed by Xiamen EASTEX FireTec. It is a world-leading fire-extinguishing agent that employs proprietary and independent technologies and is a member of EASTEX E-500 family of fire-extinguishing agents. Our company has passed ISO9001 quality system certification and ISO14001 environment certification.
■ Characteristics
- Technologically advanced. This is a product that has won national invention patent and features the world leading level in terms of technological performance.
- Green and environment-friendly. This is the only product that has received the “China Environmental Labeling” from National Environmental Protection Agency in the current pharmaceutical industry. It is non-pollutive to atmosphere and soil, non-toxic and innocuous to human body.
- Fast-cooling and fast-extinguishing, this product can safeguard personal life with effectiveness.
- Eliminating heavy smoke fast, this product can effectively reduce harms of toxic and noxious gases to human body.
- Water-saving, this product can boost fire-extinguishing efficiency.
- With extremely low corrosivity, this product can significantly reduce the maintenance costs of firefighting facilities.
■ Fire-Extinguishing Principle
With unique fire-extinguishing capacity, this product has passed the type inspection performed by China National Center for Quality Supervision and Test of Fixed Fire-fighting Systems and Fire-resisting Building Components. Its fire-extinguishing principle is:
- Photochemical reaction – cooling effect
- Chemical neutralization with combustibles to produce inert matters.
- Coverage with foams
- Sealing and insulating effect of AFFF
- Formation of aggregation layer under syntrophy
■ Discharge Means
Two foam ejecting means – intense discharge or slow discharge – can be adopted to put out fires:
* Intense discharge: A firefighting means by which foams are directly ejected onto the surface of combustibles.
* Slow discharge: A firefighting means by which foams are indirectly discharged onto the surface of combustibles via a baffle, tank wall or any other surface.
■ Storage Conditions
EASTEX E-500 6%AFFF agent can be ideally stored in the vessel with original package or a reservoir or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm).
Foam liquids would evaporate, particularly when exposed in the air where evaporation could accelerate. The fluid reservoir should be sealed and covered with a ventilation valve in order to prevent the internal air from flowing freely. The environmental temperature for storage is suggested to keep within the range of 5 ℃- 55 ℃.
■ Storage Term
Under appropriate storing and keeping condition, the storage term for this product can reach above 8 years. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Environmental Protection
EASTEX E-500 fire-extinguishing agent is progressively biodegradable. However, measures should be taken to prevent its condensed liquid, like any other substance, from being emitted directly into underground water, ground water or rainwater pipes.
Foams that are diluted or produced in vast quantities can be discharged in accordance with the local biological sewage treatment provisions.
EASTEX E-500 6%AFFF foam liquid is non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by preventing contact with the foam liquid and wearing protective goggles. In case that the foam liquid drops into eyes accidentally, users should wash their eyes with water immediately.
■ Package
There are 25 L or 200 L packages for this product.
Stored in 25 L square barrel – Gross weight 26 kg, volume 0.032 cubic meters
Stored in 200 L bucket – Gross weight 207 kg, volume 0.326 cubic meters
EASTEX E-500 Exclusive Fire Extinguishing Agent for Industrial-Style Fire Extinguishers
Product Specification
- Type
E-500 S-100-AB (-10℃)
E-500 S-100-AB (-25℃)
E-500 S-100-AB (-45℃)
- Use Method & Notices
- Usable directly without having to be mixed with water.
- The lowest operational temperatures for these three types are -5℃, -20℃ and -40℃, respectively. Low temperature will weaken the level of fire-extinguishing capability. Please choose an appropriate type specific to different areas.
- This product would produce foams in the ejecting process. To prevent it from being diluted by water, if using this product during the fire-extinguishing process, please do not spray water over the area in the presence of this product at the same time, so as to ensure its fire-extinguishing performance.
- EASTEX E-500 fire-extinguishing agent cannot be mixed with other foam liquids since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when putting out fire.
■ Storage Conditions
- EASTEX E-500 water-based fire-extinguishing agent can be ideally stored in the vessel with original package or a reservoir or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm).
- Avoid sun exposure, store sealed. Foam liquids would evaporate, particularly when exposed in the air where the evaporation could accelerate. Therefore the agent should be stored sealed in order to prevent the liquid from evaporating. If stored in a fluid reservoir, it should be sealed and covered with a ventilation valve in order to prevent the air from flowing freely inside the reservoir.
- The environmental temperature for storage is suggested to keep within the range of 0 ℃- 45 ℃.
■ Storage Term
Under appropriate storing and keeping condition, the maximum storage term for this product is above 3 years. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Security and Environmental Protection
- EASTEX E-500 water-based fire-extinguishing agent is progressively biodegradable. It can be emitted in accordance with the local sewage treatment provisions.
- The water-based fire-extinguishing agent is non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by wearing protective goggles and preventing contact with the fire-extinguishing agent. In case that the eyes contact the fire-extinguishing agent accidentally, users should wash their eyes with water immediately.
■ Package
Stored in 25 L square barrel – Gross weight 26.3 kg, net weight 25 kg, volume 0.032 cubic meters
Stored in 200 L bucket – Gross weight 211 kg, net weight 200 kg, volume 0.326 cubic meters
25 L pallets for simple package and ligneous containers can be provided as required
EASTEX E-500 Exclusive Fire Extinguishing Agent for Simple-Style Fire Extinguishers
Product Specification
- Type
- Simple-Style Fire Extinguishers
■ Characteristics
- Green and environment-friendly. Granted the “Certification of China Environmental Labeling”, this product is pollution-free to air, soil and water resources, and non-toxic, innocuous to human body.
- Usable directly without having to be mixed with water.
- Capable of putting out both A-type fires and (B-type) fires with non-water-soluble liquids, as well as C-, E- and F-type fires.
- Fast-cooling and water-saving, this product can boost fire-extinguishing efficiency and safeguard personal life with effectiveness.
- Eliminating heavy smoke fast, this product can effectively reduce harms of toxic and noxious gases to human body.
- Application Scope
- EASTEX E-500 exclusive fire-extinguishing agent for simple-style fire extinguishers applies to putting out all fires of A, B, C, E and F types, and is applicable for tanked simple-style fire extinguishers.
- Use Method & Notices
- Usable directly without having to be mixed with water.
- The lowest operational temperatures for these three types are 0℃
- This product would produce foams in the ejecting process. To prevent it from being diluted by water, if using this product during the fire-extinguishing process, please do not spray water over the area in the presence of this product at the same time, so as to ensure its fire-extinguishing performance.
- EASTEX E-500 simple-style fire-extinguishing agent cannot be mixed with other foam liquids since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when putting out fire.
■ Storage Conditions
- EASTEX E-500 Simple-Style fire extinguishers can be ideally stored in the vessel with original package or a reservoir or any other receptacle that is exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted be made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5 – 2.5 mm).
- Avoid sun exposure, store sealed. Foam liquids would evaporate, particularly when exposed in the air where the evaporation could accelerate. Therefore the agent should be stored sealed in order to prevent the liquid from evaporating. If stored in a fluid reservoir, it should be sealed and covered with a ventilation valve in order to prevent the air from flowing freely inside the reservoir.
- The environmental temperature for storage is suggested to keep within the range of 5 ℃- 45 ℃.
■ Storage Term
Under appropriate storing and keeping condition, the maximum storage term for this product is above 3 years. Factors affecting storage term include evaporation, dilution and pollution by external substances, etc.
■Security and Environmental Protection
- EASTEX E-500 Simple-Style fire extinguishers is progressively biodegradable. It can be emitted in accordance with the local sewage treatment provisions.
- The Simple-Style fire extinguishers is non-irritant to skin, yet slightly irritant to eyes. Users should mindfully protect their eyes by wearing protective goggles and preventing contact with the fire-extinguishing agent. In case that the eyes contact the fire-extinguishing agent accidentally, users should wash their eyes with water immediately.
■ Package
Stored in 25 L square barrel – Gross weight 26.3 kg, net weight 25 kg, volume 0.032 cubic meters
Stored in 200 L bucket – Gross weight 211 kg, net weight 200 kg, volume 0.326 cubic meters
25 L pallets for simple package and ligneous containers can be provided as required
Extinguisher Series
Eastex’s extinguisher models have four series: portable water-based fire extinguishers, simple spray type fire extinguishers, handheld water-based fire extinguishers, trolley-style water-based fire extinguishers. Filled with E-500 fire extinguishing agent, featured with “high-efficiency, rapid antiflaming, non-toxic and environmentally friendly” s.